Rigid-Flex circuit boards are composed of a combination of rigid and flexible circuit boards that are permanently connected to one another.
Technical Options for Rigid-Flex circuit boards:
|
|
Notes |
---|---|---|
Design |
1 to 10 layers |
|
Conductor width min. |
75µm |
|
Annular rings min. |
125µm |
|
Vias min. Ø |
200µm |
|
Surfaces |
Immersion gold (recommended), immersion tin, Lead-free HAL |
|
Materials |
Polyimide, high Tg polyimide, FR4, FR4 high Tg |
|
Material thickness |
Polyimide starting at 62µm dual-sided, FR4 starting at 100µm |
|
Max. size |
250mm x 450mm |
|
Solder-stop coating |
Coverlay or flexible solder-stop |
|
If above spec is not match your Projects , Please do not hesitate to contact us .
Product Details:
Payment & Shipping Terms:
|
Material: | Polyimide, High Tg Polyimide, FR4, FR4 High Tg | Board Thickness: | Polyimide Starting At 62µm Dual-sided, FR4 Starting At 100µm |
---|---|---|---|
SOlder Mask: | Yellow Green | Finished: | Immersion Gold |
Standard: | IPC Standard |
Double Sided PCB Design Rigid-Flexible Immersion Gold High Tg Material
Rigid-Flex circuit boards are composed of a combination of rigid and flexible circuit boards that are permanently connected to one another.
The proper application of Rigid-Flex circuit boards offers optimum solutions for difficult, limited space conditions. This technology offers the possibility of a secure connection of device components with the assurance of polarity and contact stability, as well as a reduction in plug and connector components.
Additional advantages of Rigid-Flex circuit boards are dynamic and mechanical stability, the resulting 3-dimensional freedom of design, simplified installation, space savings, and maintenance of uniform electrical characteristics.
Use of Rigid-Flex circuit boards can reduce the total cost of the final product.
A standardized manufacturing process following IPC guidelines guarantees a reliable and simultaneously an economical product, which is UL certified (UL94 / V-0); application of the UL logo is available at no extra cost.
Depending on the application, the complete Rigid-Flex circuit board may be manufactured either symmetrically with inward flexible layers, or asymmetrically with outward flexible layers (see Layer buildup for Rigid-Flex circuit boards).
We recommend the IPC-2223 Guidelines to circuit board designers for flexible circuit boards. This is available (at cost) from the website of the IPC (www.ipc.org).
Contact Person: Mr. Zhang