Tyler MartinThe quality of the PCBs I received from this company was outstanding. They were well-made and exceeded my expectations.
Olivia AndersonI've been using this company for all of our company PCB needs for years and I have never been disappointed. Their products are always consistent and reliable, and their prices are very competitive.
Ashley Williamswell-packaged and arrived in perfect condition. I would definitely recommend them to anyone in need of high-quality PCBs
4 Layer Automotive High Frequency PCB Customized For Communicate LIDAR
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Product Name||High Frenquency PCB||Base Material||Rogers, Arlon, Nelco, Taconic|
|Copper Thickness||1 OZ||Min. Line Spacing||3mil|
|Board Thickness||0.4mm||Min. Line Width||3mil|
|Min. Hole Size||6mil||Layer||4 Layer|
Automotive High Frequency PCB Customized,
4 Layer Automotive PCB High Frequency,
4 Layer High Frequency PCB Customized
Automotive High Frequency PCB Customized for Communicate LIDAR
Base Material: Rogers, Arlon, Nelco, Taconic
Copper Thickness: 0.5oz-2oz
Board Thickness: 0.4-5mm
Min. Hole Size: 0.15mm(Mechanical),0.1mm(HDI)
Min. Line Width: 0.075mm
Min. Line Spacing: 0.075mm
Surface Finishing: Immersion silver/Gold Finger/Immersion tin/ENIG/ENEPIG
Board Size: Customize Min:6mm*6mm Max:457mm*610mm
Product name: High Frequency PCB
Application: Cell phone, Telecommunications, Military and aerospace, RF microwave, Automotive
Sheet thickness: 0.1mm-7mm
Maximum board width: Customize
Type: High Frequency PCB
Certificate: TS16949.ISO14001.ROHS. ISO9001
Color: Green, White, Blue, Black, Red, Yellow
Package: Vacuum packing
Description of High Frequency PCB Printed Circuit Board
1.Design:The design of high frequency PCB should be unified and stable between the power supply and the ground. Wiring and proper terminating can eliminate the reflection; Careful wiring and proper terminating can reduce small capacitive and inductive crosstalk; Noise must be suppressed to meet EMC requirements.
2.Manufacturer: When high frequency circuit board is manufactured, the dielectric loss (Df) is small, which mainly affects the signal transmission quality. The smaller the dielectric loss, the smaller the signal loss; The lower the water absorption rate, the higher the water absorption rate, will affect the dielectric and medium loss will be affected. The dielectric constant (DK) must be small and stable. In general, the lower the transmission speed of the signal, the better. The transmission speed of the signal and the electrical constant of the dielectric constant of the material easily lead to the delay of the signal transmission. As far as possible with the thermal expansion coefficient of copper foil, because inconsistent will lead to copper foil separation in hot and cold changes.
Specification of Omini High Frequency PCB Printed Circuit Board
Rogers: 4350B, 5880, 4003C, SY SCGA-500, S7136, Arion, Taconic
|4||Max.finished board side||457mm*610mm|
|5||Min.drilled hole size||0.25mm|
|8||Surface finish/treatment||Electroless/immersion gold/ENIG/Immersion silver/Organic solderability|
|9||Copper thickness||0.5 oz - 2.0oz|
|10||Solder mask color||green/black/white/red/blue/yellow|
|11||Inner packing||Vacuum packing, Plastic bag|
|12||Outer packing||Standard carton packing|
|13||Hole tolerance||PTH:±0.076, NTPH:±0.05|
|14||Certificate||UL, ISO9001, ISO14001, RoHS, CQC|
|15||Profiling Punching||Routing, V-CUT, Beveling|
|16||Assembly Service||Providing OEM service to all sorts of printed circuit board assembly|
Q1:Does Omini have enough capacity to prodece high-quality products?
A: Omini has 20 years of history in manufacturing PCB, more than 200 employees and 10,000㎡ factory area.We got the UL, ISO9001 certificates, and our production is sold abroad. We have engouh machines & equipment to ensure the quality, please check our Production Equipment list picturers.
Q2:How long does customers need to wait for the quotation and lead time?
A: We have a prefessional group to deal with your inquiry. In our working time, we will reply to your email within 30 minutes to show we have received your inquiry, Then we will send you our quotation in no more than 6 hours. Please noticed our working time is Monday to Friday, 8am to 24pm.
Q3:How can I make sure my PCB gerber is safety?
A: We promise we won't divulge your gerber to the 3rd party, one of our responsibilities is protecting customer information privacy and security, customer information can be included: company name, address, number, trademark, ect. And we could sign NDA with client if necessary.