Tyler MartinThe quality of the PCBs I received from this company was outstanding. They were well-made and exceeded my expectations.
Olivia AndersonI've been using this company for all of our company PCB needs for years and I have never been disappointed. Their products are always consistent and reliable, and their prices are very competitive.
Ashley Williamswell-packaged and arrived in perfect condition. I would definitely recommend them to anyone in need of high-quality PCBs
10 Layer FPGA High Speed PCB Circuit Board Hard Gold 5U
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Product Name||FPGA High-Speed PCB||Copper Thick||1 OZ|
|Base Material||TG 180||Min Trace/Space||4mil/4mil|
|Surfacet Treatment||Hard Gold 5U||Board Thickness||1.6mm|
|Layer||10Layer||Application||FPGA High-Speed PCB|
FPGA High Speed PCB,
PCB Circuit Board Hard Gold 5U,
10 Layer High Speed PCB
FPGA High-Speed PCB
Model: FPGA high-speed circuit board
Finished Thickness: 1.6mm
Copper Thickness: Inner/outer 1OZ
Min Trace/Space: 4mil/4mil
Surfacet Treatment: Hard Gold 5U
Application: FPGA high-speed PCB
Certificate: TS16949.ISO14001.ROHS. ISO9001
Package: Vacuum packing
What is a high-speed circuit?
It is generally believed that if the frequency of a digital logic circuit reaches or exceeds 45MHZ~50MHZ, and the circuit working above this frequency has already accounted for a certain share of the entire electronic system (for example, 1/3), it is called a high-speed circuit.
In fact, the harmonic frequency of the signal edge is higher than the frequency of the signal itself. It is the rising and falling edges of the signal (or signal jumps) that cause unexpected results in signal transmission. Therefore, it is generally agreed that if the line propagation delay is greater than 1/2 of the rise time of the digital signal driving end, such signals are considered to be high-speed signals and produce transmission line effects.
The transmission of the signal occurs at the instant when the signal state changes, such as the rise or fall time. The signal passes from the driving end to the receiving end for a fixed period of time. If the transmission time is less than 1/2 of the rise or fall time, the reflected signal from the receiving end will reach the driving end before the signal changes state. Conversely, the reflected signal will reach the drive end after the signal changes state. If the reflected signal is strong, the superimposed waveform may change the logic state.
|Cellular & Pager Telecom||1-3 GHz|
|Cars, individuals receive satellite||2.4 GHz|
|Low noise block downconverter (LNB/LNA)||2-3GHz|
|Direct broadcast satellite (DBS) system||13 GHz|
|Families receiving satellite||12-14 GHz|
|Wireless carry communication antenna system||14 GHz|
|Very small aperture terminal (VSAT)||12-14 GHz|
|Individuals receive base stations, or satellite launch||13-24GHz|
|Digital microwave system||10-38 GHz|
|Car Avoidance system (CA),||75 GHz
Specification Of Omini High Speed PCB Printed Circuit Board
|Material||Rogers: 4350B, 5880, 4003C, SY SCGA-500, S7136, Arion, Taconic|
|Max.finished board side||457mm*610mm|
|Min.drilled hole size||0.25mm|
|Surface finish/treatment||Electroless/immersion gold/ENIG/Immersion silver/Organic solderability|
|Copper thickness||0.5 oz - 2.0oz|
|Solder mask color||green/black/white/red/blue/yellow|
|Inner packing||Vacuum packing, Plastic bag|
|Outer packing||Standard carton packing|
|Hole tolerance||PTH:±0.076, NTPH:±0.05|
|Certificate||UL, ISO9001, ISO14001, RoHS, CQC|
|Profiling Punching||Routing, V-CUT, Beveling|
|Assembly Service||Providing OEM service to all sorts of printed circuit board assembly|
Q1:Does Omini have enough capacity to produce high-quality products?
A: Omini has 20 years of history in manufacturing PCB, more than 200 employees and 10,000㎡ factory area.We got the UL, ISO9001 certificates, and our production is sold abroad. We have engouh machines & equipment to ensure the quality, please check our Production Equipment list picturers.
Q2:How long does customers need to wait for the quotation and lead time?
A: We have a prefessional group to deal with your inquiry. In our working time, we will reply to your email within 30 minutes to show we have received your inquiry, Then we will send you our quotation in no more than 6 hours. Please noticed our working time is Monday to Friday, 8am to 24pm.
Q3:How can I make sure my PCB gerber is safety?
A: We promise we won't divulge your gerber to the 3rd party, one of our responsibilities is protecting customer information privacy and security, customer information can be included: company name, address, number, trademark, ect. And we could sign NDA with client if necessary.